{"product_id":"dc97-16782a-6602-001655-dc96-00882c-dryer-maintenance-kit-2-for-samsung","title":"DC97-16782A 6602-001655 DC96-00882C Dryer Maintenance Kit (2) for Samsung","description":"\u003ch3 id=\"ProductsCard-ProductList-ProductTitle-gid:\/\/shopify\/Product\/1387726241854\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Che1yMVgNG0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/h2\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eNoisy dryer? With this dryer maintenance kit, you get everything you need to fix all the parts in your dryer that can cause unpleasant noises as they degrade over time. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe kit contains:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDryer belt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIdler pulley\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 drum rollers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe dryer belt is fed through the idler pulley to rotate the dryer drum. If these parts are damaged, it can lead to excessive thumping noises. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe wheels carry the dryer as it rotates. If even one of these wheels is worn out, it can throw the rotation out of alignment. This can lead to squealing or thumping noises.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eReplacing each of these parts is common practice to prevent the dryer from breaking down again shortly after the repair. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit comes with 2 Dryer Rollers (\u003cspan\u003eDC97-16782A)\u003c\/span\u003e, 1 Dryer Belt (\u003cspan\u003e6602-001655)\u003c\/span\u003e and 1 Idler Pulley (\u003cspan\u003eDC96-00882C).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCross Reference Information for DC97-16782A (Dryer Roller):\u003cbr\u003e\u003cspan\u003eDC97-16782A, AP5325135, 2027851, DC97-07523A, DC97-07523B.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCross Reference Information for 6602-001655 (Dryer Belt):\u003cbr\u003e935594, 6602-001314, PS4133825, B001KGX5G4, 6602-001655, AP4373659, 6602-001314, 1935594.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCross Reference Information for DC96-00882C (Idler Pulley):\u003cbr\u003eDC96-00882C, DC96-00882B, PS11771601, B06XKB5FSL.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eQuality you can Trust! All Snap Products are made with premium materials and are tested so they last.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eCompatible with the following Dryer brands: Samsung\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eJust because parts look the same does not mean that they are the same. Use the model numbers below to ensure that this part is compatible with your appliance! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAll Snap parts come with installation instructions to help you with your repair. If you need more help, you can always contact us for further assistance. Email us at \u003cstrong\u003esupport@snap.parts\u003c\/strong\u003e or give us a call at \u003c\/span\u003e\u003cstrong\u003e1-802-727-4126 \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e For DC97-16782A, click here then click on Model Numbers tab below the product pictures. \u003c\/p\u003e\n\u003cp\u003e For 6602-001655, click here then click on Model Numbers tab below the product pictures. \u003c\/p\u003e\n\u003cp\u003e For DC96-00882C, click here then click on Model Numbers tab below the product pictures. \u003c\/p\u003e\n\u003ch5\u003eInstallation Instructions\u003c\/h5\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003cp\u003eFor \u003cspan\u003eDC97-16782A (Drum Roller): \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnplug appliance and\/or turn off circuit breakers to prevent electrocution.\u003c\/li\u003e\n\u003cli\u003eRemove screws securing the top panel. Remove the top panel by pulling then lifting. Set aside.\u003c\/li\u003e\n\u003cli\u003eRemove locking tabs securing the control panel, disconnect wire harness and set aside.\u003c\/li\u003e\n\u003cli\u003eOpen dryer door and remove the two screws at the bottom. Remove the upper four screws that secure the front panel. Grab front panel and lift to release it from the two locking tabs. Disconnect the door switch wire harness. Release it from the three mounting brackets from the bottom.\u003c\/li\u003e\n\u003cli\u003eRemove the panel that holds the control panel by unscrewing the screws. Disconnect the light bulb wire harness and release it from the plastic retainer. Slightly pull panel and have it at an angle, release the wire harnesses from the plastic retainers, set aside.\u003c\/li\u003e\n\u003cli\u003eNext, is removing the bulk head from the blower housing by unscrewing the screw. Then, disconnect the moisture sensor wire harness on the other side.\u003c\/li\u003e\n\u003cli\u003eRemove the four screws that secure the bulk head to the cabinet, lift front bulk head off the cabinet. There are two rollers on the front bulk head, if those are the ones that have to be changed then continue to step 11. If the ones on the back of the drum are the ones that have to be changed then continue to step 8.\u003c\/li\u003e\n\u003cli\u003eReach in on the drum on each side, grab the idler pulley, pull it toward the outside of the machine to release the tension of the belt. Lift the belt to guide the drum out of the machine.\u003c\/li\u003e\n\u003cli\u003eNext, remove the heating element of the dryer. On the left side of the dryer there is a water valve, using a wrench remove the water valve that is connected to the steam sprayer. Be sure to place a towel underneath.\u003c\/li\u003e\n\u003cli\u003eOn the upper left-hand side of the dryer there is a wire harness to remove from the plastic retainer clips, remove the six screws securing the bulk head. Lift the rear bulk head off the mounting tabs and set aside for replacement.\u003c\/li\u003e\n\u003cli\u003eTo replace the roller that has the lint filter duct right behind it, take a wrench instead of a socket to reach in to take the nut off and with an 8 mm socket hold down the shaft at the same time. For the others, use a 17 mm socket on the back side and on the front hold it down with an 8 mm socket and snap it out. Be careful not to lose any pieces.\u003c\/li\u003e\n\u003cli\u003eTo install the new rollers, place the metal washer first then, place the new roller, and then place the other metal washer first then the nut on the other side and tighten with 8 mm socket on top and 17 mm socket on the bottom. Install any new rollers needing to install.\u003c\/li\u003e\n\u003cli\u003e­­If you only had to change the rollers on the front bulk head then continue to step ­­15.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eIf you had to change the rollers on the rear of the machine, carefully replace the rear bulk head, hook into tabs, reconnect wire harness into the plastic retainer clips, replace screws. Reattach water valve hose. Reposition heating element and secure with screw.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003col start=\"14\"\u003e\n\u003cli\u003ePlace drum back into the machine by guiding it with the belt. Set the belt in place making sure the ridges are facing the drum. Reach in to route the belt through the pulleys. Grab the idler pulley and pull it toward the outside of the machine. Then, place the belt on the idler pulley.\u003c\/li\u003e\n\u003cli\u003ePlace the front bulk head by locking it in the tabs of the left side of machine, align the drum with the front bulk head making sure the drum goes over the rollers. Secure it in the locking tabs on the other side. Replace all screws along with the blower housing screw.\u003c\/li\u003e\n\u003cli\u003eReconnect moisture sensor wire harness. Replace the wire harnesses in the plastic retainer clips. Reconnect the light bulb wire harness. The door switch wire harness will be connected after control panel is replaced.\u003c\/li\u003e\n\u003cli\u003eReattach the front panel, replace the wire harnesses onto the plastic retainer clips. Make sure the front panel goes in the locking tabs. Secure with screws.\u003c\/li\u003e\n\u003cli\u003eReconnect door switch wire harness. Place front panel on making sure it is locked in the locking tabs. Secure with screws. Open door to replace screws.\u003c\/li\u003e\n\u003cli\u003eThen, reattach the control panel by first reconnecting the wire harness then placing the panel on the locking tabs and then snapping it into place. Reattach the top panel and secure it with screws.\u003c\/li\u003e\n\u003cli\u003ePlug in appliance and installation is complete.\u003cbr\u003eTools Needed:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\u003cli\u003eWrench\u003c\/li\u003e\n\u003cli\u003e17mm socket\u003c\/li\u003e\n\u003cli\u003e8mm socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor \u003cspan\u003e6602-001655 (Dryer Belt): \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnplug appliance and\/or turn off circuit breakers to prevent electrocution.\u003c\/li\u003e\n\u003cli\u003eRemove screws securing the top panel. Remove the top panel by pulling then lifting. Set aside.\u003c\/li\u003e\n\u003cli\u003eRemove locking tabs securing the control panel, disconnect wire harness and set aside.\u003c\/li\u003e\n\u003cli\u003eOpen dryer door and remove the two screws at the bottom. Remove the upper four screws that secure the front panel. Grab front panel and lift to release it from the two locking tabs. Disconnect the door switch wire harness. Release it from the three mounting brackets from the bottom.\u003c\/li\u003e\n\u003cli\u003eRemove the panel that holds the control panel by unscrewing the screws. Disconnect the light bulb wire harness and release it from the plastic retainer. Slightly pull panel and have it at an angle, release the wire harnesses from the plastic retainers, set aside.\u003c\/li\u003e\n\u003cli\u003eNext, is removing the bulk head from the blower housing by unscrewing the screw. Then, disconnect the moisture sensor wire harness on the other side.\u003c\/li\u003e\n\u003cli\u003eRemove the four screws that secure the bulk head to the cabinet, lift front bulk head off the cabinet and set aside.\u003c\/li\u003e\n\u003cli\u003eNext, reach in on the drum on each side, grab the idler pulley, pull it toward the outside of the machine to release the tension of the belt. Once done, slightly lift the drum and remove the belt off.\u003c\/li\u003e\n\u003cli\u003eTo replace the drum belt, slightly lift the drum and place in the new belt. Set the belt in place making sure the ridges are facing the drum. Reach in to route the belt through the pulleys. Grab the idler pulley and pull it toward the outside of the machine. Then, place the belt on the idler pulley.\u003c\/li\u003e\n\u003cli\u003eNext, place the front bulk head by locking it in the tabs of the left side of machine, align the drum with the front bulk head making sure the drum goes over the rollers. Secure it in the locking tabs on the other side. Replace all screws along with the blower housing screw.\u003c\/li\u003e\n\u003cli\u003eReconnect moisture sensor wire harness. Replace the wire harnesses in the plastic retainer clips. Reconnect the light bulb wire harness. The door switch wire harness will be connected after control panel is placed.\u003c\/li\u003e\n\u003cli\u003eReattach the front panel, replace the wire harnesses onto the plastic retainer clips. Make sure the front panel goes in the locking tabs. Secure with screws.\u003c\/li\u003e\n\u003cli\u003eReconnect door switch wire harness. Place front panel on making sure it is locked in the locking tabs. Secure with screws. Open door to replace screws.\u003c\/li\u003e\n\u003cli\u003eThen, reattach the control panel by first reconnecting the wire harness then placing the panel on the locking tabs and then snapping it into place. Reattach the top panel and secure it with screws.\u003c\/li\u003e\n\u003cli\u003ePlug in appliance and installation is complete.\u003cbr\u003eTools Needed:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor \u003cspan\u003eDC96-00882C (Idler Pulley):\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnplug appliance and\/or turn off circuit breakers to prevent electrocution.\u003c\/li\u003e\n\u003cli\u003eRemove screws securing the top panel, pull and lift, set aside.\u003c\/li\u003e\n\u003cli\u003eTo remove the console, there are three locking tabs on the top needed to release, lift each to release. Release locking tab of wire harness, pull the panel and set aside.\u003c\/li\u003e\n\u003cli\u003eOpen dryer door and remove the two screws at the bottom. Remove the upper four screws that secure the front panel. Grab front panel and lift to release it from the two locking tabs. Disconnect the door switch wire harness. Release it from the three mounting brackets from the bottom.\u003c\/li\u003e\n\u003cli\u003eRemove the panel that holds the control panel by unscrewing the screws. Disconnect the light bulb wire harness and release it from the plastic retainer. Slightly pull panel and have it at an angle, release the wire harnesses from the plastic retainers, set aside.\u003c\/li\u003e\n\u003cli\u003eNext, is removing the bulk head from the blower housing by unscrewing the screw. Then, disconnect the moisture sensor wire harness on the other side.\u003c\/li\u003e\n\u003cli\u003eRemove the four screws that secure the bulk head to the cabinet, lift front bulk head off the cabinet.\u003c\/li\u003e\n\u003cli\u003eReach in on the drum on each side, grab the idler pulley, pull it toward the outside of the machine to release the tension of the belt. Lift the belt to guide the drum out of the machine.\u003c\/li\u003e\n\u003cli\u003eTo remove the idler pulley, remove the spring that places tension onto it by sliding it downward. Remove the screw that holds the idler assembly. Remove the old assembly.\u003c\/li\u003e\n\u003cli\u003eTo place in the new idler pulley, align the tab in the slot, align the holes and replace screws. Replace the spring. Make sure there is tension onto the pulley.\u003c\/li\u003e\n\u003cli\u003ePlace drum back into the machine by guiding it with the belt. Set the belt in place making sure the ridges are facing the drum. Reach in to route the belt through the pulleys. Grab the idler pulley and pull it toward the outside of the machine. Then, place the belt on the idler pulley.\u003c\/li\u003e\n\u003cli\u003ePlace the front bulk head by locking it in the tabs of the left side of machine, align the drum with the front bulk head making sure the drum goes over the rollers. Secure it in the locking tabs on the other side. Replace all screws along with the blower housing screw.\u003c\/li\u003e\n\u003cli\u003eReconnect moisture sensor wire harness. Replace the wire harnesses in the plastic retainer clips. Reconnect the light bulb wire harness. The door switch wire harness will be connected after control panel is replaced.\u003c\/li\u003e\n\u003cli\u003eReattach the console, replace the wire harnesses onto the plastic retainer clips. Make sure the front panel goes in the locking tabs. Secure with screws. Reconnect door switch wire harness. Place front panel on making sure it is locked in the locking tabs. Secure with screws. Open door to replace screws.\u003c\/li\u003e\n\u003cli\u003eThen, reattach the control panel by first reconnecting the wire harness then placing the panel on the locking tabs and then snapping it into place. Reattach the top panel and secure it with screws.\u003c\/li\u003e\n\u003cli\u003ePlug in appliance and the dryer is set to go!\u003cbr\u003eTools Needed:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\u003cli\u003eSmall flat head screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2274\/9145\/files\/New_Shipping_Map.png?v=1588965202\u0026amp;width=700\"\u003e\u003c\/p\u003e","brand":"PRYSM","offers":[{"title":"Default Title","offer_id":50274896773397,"sku":"lpj1792248495550","price":55.55,"currency_code":"BRL","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0859\/8270\/7989\/files\/dc97-16782a-6602-001655-dc96-00882c-dryer-maintenance-kit-2-for-samsung_1.jpg?v=1792248501","url":"https:\/\/getcladfashion.shop\/products\/dc97-16782a-6602-001655-dc96-00882c-dryer-maintenance-kit-2-for-samsung","provider":"My Store","version":"1.0","type":"link"}